• Print only the body of the page. Set to print background colors and images.
  • Print the whole page. Set to print background colors and images.

NINOMIYA Yoshihiko


Title Professor
Belong to Dept. of Applied Chemistry
Applied Chemistry (graduate school)
Graduated Nagoya University, Graduate School of Engineering
Degree Dr. of Engineering, Nagoya University
Academic Institutional Membership The Society of Chemical Engineers, Japan
The Japan Institute of Energy
Japan Society of Material Cycles and Waste Management
Field of Study Environmental Chemical Engineering
Research, Studies Clinker formation mechanism in biomass combustion and gasification, Ash deposition and melting behavior in coal combustion and gasification, Prediction of ash deposition behavior using deep learning, A new hydrogen production technology aimed at reducing CO2 emissions
Curriculum Specialized Reaction Engineering (at Graduate School), Reaction Engineering, Chemical Engineering, Chemical Engineering Laboratory

Books Published, Translation

Clean Coal Technology towards 21 century (joint work), Osaka Daigaku Shuppansha, 2004

Coal Engineering Digest, Usage of Coal and Global Environment (joint work), Denryoku Shinposya, 1993

Academic Papers, Critique

Effect of the optimal combination of bituminous coal with high biomass content on particulate matter (PM) emissions during co-firing, Fuel , 316 123244 (2022)

Reaction mechanisms underpinning the removal of Cs from simulated Cs-contaminated ash during thermal treatment with NaCl or KCl, Fuel , 289, 119905 (2021)

Use of thermal treatment with CaCl2 and CaO to remove 137Cs in the soil collected from the area near the Fukushima Daiichi Nuclear Power Plant, Journal of Hazardous Materials , 401, 123364(2021)

Study on Mass Transfer of Ash during Bamboo Powder Combustion, Journal of the Japan Institute of Energy 、99(8), 108-116.(2020)

Characteristics of iron and sulphur in high-ash lignite (Pakistani lignite) and their influence on long-term T23 tube corrosion under super-critical coal-fired boiler conditions, Fuel , Volume 264, 15 March 2020, 116855

Kinetic Study of Long-Term T23 Tube Corrosion upon Low-Rank Coal Ash Deposition under Oxy-Fuel Combustion Conditions, Energy & Fuels (2019), 33(10), 10209-10217

Low-temperature trace light-tar reforming in biomass syngas by atmospheric hydrogenation and hydrogenolysis, Fuel Processing Technology (2018), 181, 304-310.

Spatial distribution of Cr-bearing species on the corroded tube surface characterised by synchrotron X-ray fluorescence (SXRF) mapping and micro-XANES: exposure of tubes in oxy-firing flue gas, Journal of Materials Science (2018), 53(16), 11791-11812.

Occurrence and characteristics of abundant fine included mineral particles in Collie coal of Western Australia, Fuel , 216, 53-60 (2018)

Enhancement of Cs vaporization from simulated granular ash through thermal treatment in N2 atmosphere with the addition of a mixture of CaCl2 and CaO, Fuel , 214, 409-415 (2018)

Partitioning of Lead and Lead Compounds under Gasification-Like Conditions, Energy & Fuels, 32 (1), 651-657 (2018)

The effect of ceria content in nickel-ceria composite anode catalysts on the discharge performance for solid oxide fuel cells, International Journal of Hydrogen Energy, 43 (4), 2394-2401 (2018)

Vaporization Behavior of Cs, K, and Na in Cs-Containing Incineration Bottom Ash during Thermal Treatment with CaCl2 and CaO, Energy & Fuels, 31 (12), 14045-14052 (2017)

Influence of inherent moisture on the formation of particulate matter during low-rank coal combustion, Journal of Chemical Engineering of Japan, 50 (5), 351-357 (2017)

High-throughput optimization of near-infrared-transparent Mo-doped In2O3 thin films with high conductivity by combined use of atmospheric-pressure mist chemical-vapor deposition and sputtering, Thin Solid Films, 626, 46-54 (2017)

Zinc nitride as a potential high-mobility transparent conductor, Physica Status Solidi A: Applications and Materials Science, 214 (2) (2017)

Ignitability and combustibility of Yallourn pyrolysis char under simulated blast furnace conditions, Fuel Processing Technology, 156, 113-123 (2017)

High-temperature tube corrosion upon the interaction with Victorian brown coal fly ash under the oxy-fuel combustion condition, Proceedings of the Combustion Institute, 36 (3), 3941-3948 (2017)

Effect of silica additive on the high-temperature fireside tube corrosion during the air-firing and oxy-firing of lignite (Xinjiang coal) - Characteristics of bulk and cross-sectional surfaces for the tubes, Fuel ,187, 68-83 (2017)

Influence of gaseous SO2 and sulphate-bearing ash deposits on the high-temperature corrosion of heat exchanger tube during oxy-fuel combustion, Fuel Processing Technology, 167, 193-204 (2017)

Spatial distribution of chromium on the corroded tube surface characterised by synchrotron X-ray fluorescence (SXRF) mapping and μ-XANES: Co-existence of Ca-rich ash deposits and oxy-firing flue gas, Fuel Processing Technology, 167, 31-42 (2017)

Role of CaCl2 and MgCl2 addition in the vaporization of water-insoluble cesium from incineration ash during thermal treatment, Chemical Engineering Journal, 323, 114-123 (2017)

Truly Transparent p-Type γ-CuI Thin Films with High Hole Mobility, Chemistry of Materials, 28 (14), 4971-4981 (2016)

Comparative study of electron transport mechanisms in epitaxial and polycrystalline zinc nitride films, Journal of Applied Physics, 119 (2) (2016)

Vaporization Mechanisms of Water-Insoluble Cs in Ash During Thermal Treatment with Calcium Chloride Addition, Environmental Science & Technology, 50 (24), pp 13328—13334 (2016)

Study on the species of heavy metals in MSW incineration fly ash and their leaching behavior, Fuel Processing Technology, 152, 108–115 (2016)

Influence of Steam, Hydrogen Chloride, and Hydrogen Sulfide on the Release and Condensation of Cadmium in Gasification, Energy & Fuels, 30, 2, 943-953 (2016)

Ignitability and Combustibility of Yallourn Pyrolysis Char Blended with Pulverized Coal Injection Coal under Simulated Blast Furnace Conditions, Energy & Fuels, 30 (3), 1858–1868 (2016)

Development of thermal spraying materials through several corrosion tests for heat exchanger tube of incinerators, Fuel Processing Technology, 141, 216-224 (2016)

Condensation Behavior of Heavy Metal Vapors upon Flue Gas Cooling in Oxy-fuel versus Air Combustion, Journal of Chemical Engineering of Japan, 48, 6, 450-457 (2015)

Pilot-scale experimental and CFD modeling investigations of oxy-fuel combustion of Victorian brown coal, Fuel, 144, 111-120 (2015)

Effect of H2S concentration in gasified gas on the microstructure and leaching properties of coal slag, Fuel, 116, 812-819 (2014)

Condensation Behavior of Heavy Metals during Oxy-fuel Combustion: Deposition, Species Distribution, and Their Particle Characteristics, Energy & Fuels, 27 (10), 5640–5652, (2013)

Rheological evolution and crystallization response of molten coal ash slag at high temperatures, AIChE Jornal , 59(8), 2726–2742 (2013)

Effect of inorganic particulates on the condensation behavior of lead and zinc vapors upon flue gas cooling, Proceedings of the Combustion Institute, Proceedings of the Combustion Institute , 34, 2821-2829, 2013

Effect of coal blending on the leaching characteristics of arsenic in fly ash from fluidized bed coal combustion, Fuel Processing Technology , 106, 769-775, 2013

Effect of HCl, SO2 and H2O on the condensation of heavy metal vapors in flue gas cooling section, Fuel Processing Technology, 105, 181-187, 2013

Effect of magnesium additives on PM2.5 reduction during pulverized coal combustion, Fuel Processing Technology, 105, 188-194, 2013

A microscopic study of the precipitation of metallic iron in slag from iron-rich coal during high temperature gasification, Fuel, 103, 101-110, 2013

Use of Synchrotron XANES and Cr-Doped Coal to Further Confirm the Vaporization of Organically Bound Cr and the Formation of Chromium(VI) During Coal Oxy-Fuel Combustion, Environmental Science & Technology, 46(6), 3567-3573, 2012

Synchrotron-Based XANES Speciation of Chromium in the Oxy-Fuel Fly Ash Collected from Lab-Scale Drop-Tube Furnace, Environmental Science & Technology, 45(15), 6640-6646, 2011

Ash partitioning during the oxy-fuel combustion of lignite and its dependence on the recirculation of flue gas, impurities (H2O, HCl and SO2), Fuel, 90(6), 2207-2216, 2011

An investigation on the heterogeneous nature of mineral matters in Assam (India) coal by CCSEM technique, Fuel Processing Technology, 92(5), 1068-107. 2011

Experimental investigation of the combustion of bituminous coal in air and O2/CO2 mixtures. 2: Variation of the transformation behaviour of mineral matter with bulk gas composition, Fuel, 90(4), 1361-1369. 2011

Effect of Coal Drying on the Behavior of Inorganic Species during Victorian Brown Coal Pyrolysis and Combustion, Energy & Fuels, 25(7), 2764-2771, 2011

Effects of HCl, SO2 and H2O in flue gas on the condensation behavior of Pb and Cd vapors in the cooling section of municipal solid waste incineration, Proceedings of the Combustion Institute, 33, 2, 2787-2793. 2011

Evolution of organically bound metals during coal combustion in air and O2/CO2 mixtures – A case study of Victorian brown coal, Proceedings of the Combustion Institute, 33, 2, 2795-2802, 2011

Influence of woody biomass (cedar chip) addition on the emissions of PM10 from pulverised coal combustion, Fuel, 90, 1, 77-86. 2010

Evaluation of a Mg-based additive for particulate matter (PM)2.5 reduction during pulverized coal combustion. Energy & Fuels, 24(1), 199-204, 2010

Experimental Investigation of the Combustion of Bituminous Coal in Air and O2/CO2 Mixtures: 1. Particle Imaging of the Combustion of Coal and Char, Energy & Fuels,, 24(9), 4803-4811, 2010

Effect of HCl/SO2/H2O on the Deposition of Heavy Metal Vapors in the Cooling Section of an Incineration Plant, Journal of Chemical Engineering of Japan,, 43(8), 713-719, 2010

Effect of Additives on the Reduction of PM2.5 Emissions during Pulverized Coal Combustion, Energy & Fuels, 23(7), 3412-3417, 2009

Mineral interactions and their impacts on the reduction of PM10 emissions during co-combustion of coal with sewage sludge, Proceedings of the Combustion Institute, 32, 2701-2708, 2009

Kinetic study of chlorine behavior in the waste incineration process, Proceedings of the Combustion Institute, 32, 335-342, 2009

Effects of coal blending on the reduction of PM10 during high-temperature combustion 2. A coalescence-fragmentation model, Fuel, 88, 150-157, 2009

Effects of coal blending on the reduction of PM10 during high-temperature combustion 1. Mineral transformations. Fuel, 87(13-14), 2997-3005, 2008

Behavior of chlorine in HCl/H2O/O2/CO2/N2 reaction system, Journal of Chemical Engineering of Japan, 32, 335-342, 2008

Properties of water-soluble and insoluble particulate matter emitted from dewatered sewage sludge incineration in a pilot-scale ash melting furnace, Fuel, 87, 964-973, 2008

Interactions among Inherent Minerals during Coal Combustion and Their Impacts on the Emission of PM10 -1. Emission of micron-sized particles, Energy & Fuels, 21. 756-765, 2007

Interactions among Inherent Minerals during Coal Combustion and Their Impacts on the Emission of PM10 -2. Emission of Submicron-sized Particles-, Energy & Fuels, 21, 766-777, 2007

Formation of Ultra-fine Particulates (PM1) from the Oxygen-Enriched Combustion of Dried Sewage Sludge and Their Properties, Energy & Fuels, 21, 88-98, 2007

Computer-Controlled Scanning Electron Microscopy (CCSEM) Investigation on the Heterogeneous Nature of Mineral Matter in Six Typical Chinese Coals. Energy & Fuels, 21, 468-476, 2007

Transformation of phosphorus during combustion of coal and sewage sludge and its contributions to PM10, Proceedings of the Combustion Institute, Volume 31, Issue 2, 2847-2854, 2007

Occurrence of Inorganic Elements in Condensed Volatile Matter Emitted From Coal Pyrolysis and Their Contributions to the Formation of Ultra-fine Particulates during Coal Combustion, Energy & Fuels, 4, 1482-1489, 2006

Formation of submicron particulate matter (PM1) during coal combustion and influence of reaction temperature, Fuel, 85, 1446-1457, 2006

Fundamental Behaviors in Combustion of Raw Sewage Sludge, Energy & Fuels, 20, 1, 77-83, 2006

Emission of suspended PM10 from laboratory-scale coal combustion and its correlation with coal mineral properties, Fuel, 85,194-203, 2006

Combustion and De-SOx Behavior of High-Sulfur Coals Added with Calcium Acetate Produced from Biomass Pyroligneous Acid, Fuel, 83, 2123-2131, 2004

Combustibility of sewage sludge and the mineral transformation at different oxygen content in drop tube furnace, Fuel Processing Technology, 983-1011, 2004

Parametric study of particulate matter emission during coal combustion-influences of coal type, coal particle size and air ratio, Fuel Processing Technology, 1039-1053, 2004

Transformation of mineral and emission of particulate matters during co-combustion of coal with sewage sludge, Fuel, 83, 751-764, 2004

Partitioning of sulfur and calcium during pyrolysis and combustion of high sulfur coal impregnated with calcium acetate as the desulfurization sorbents, Fuel, 83, 1039-1053, 2004

Coal ash buildup on ceramic filters in a hot gas filtration system, Energy and Fuel, 17, 316-320, 2003

Fate of alkali elements during pyrolysis and combustion of two Chinese coals, Journal of Chemical Engineering of Japan, 36 (7), 759-769, 2003

In situ desulfurization during combustion of high-sulfur coals added with sulfur capture sorbent, Fuel, 82, 255-266, 2003

CCSEM analysis of ash from combustion of coal added with limestone, Fuel, 81, 1499-1508, 2002

Theoretical study on the thermal decomposition of pyridine, Fuel, 79, 449-457, 2000

Oxidation Reaction of Calcium Sulfide in an advanced PFBC condition (I) - Effects of O2 concentration, type of limestone and particle size-, J. Institute of Energy, Japan , 78, 2, 99-109, 1999

Oxidation Reaction of Calcium Sulfide in an advanced PFBC condition (II) - Grain model application-, J. Institute of Energy, Japan ,78, 9, 750-759, 1999


JIE Award, The Japan Institute of Energy, 2014

Progress Award of the Japan Institute of Energy, 1997

Distinguished Paper Award of the Fuel Society of Japan, "Effect of Fluxes on Ash Melting Behavior", 1991

Page Top